Magload Ltd

• Occupies the chamber to show the chamber is clear
• Suitable for all .22 LBP chambers
• Drop the hammer without damaging the gun
• Specifically shaped to clear the ejector and extractor in most popular pistols
• Action Air BB pusher too!

Secure the action with the unique MAGLOAD breech flag! Designed specifically for the new IPSC rule change with long barrelled pistols requiring you to lower the hammer, this breech flag will allow you to drop the hammer properly by pulling the trigger with no damage to the breech face, firing pin or extractor!

Simply slide forward, hammer down and holster with no faff. Leave the flag fitted until you next load and make ready, or remove it under RO supervision, it’s up to you.

As this is adapted from our unreleased design for an Action Air BB pusher, this will also allow you to remove the BB from the hop unit of your Action Air gun quickly and easily. It’s small, and can be attached to a retractable lanyard with the provided hole.

Quickly switch your belt’s flag holder for a 12g, .223/5.56 or .22lr breech flag! Compatible with the MAGLOAD Clic system, will require a QRB belt clip attachment or Security Buckle. Both can also be used as convenient glasses holders!

• 12g fits the MAGLOAD 12g flags
• Rifle fits the .22 and .223 flags

Nexus PRO is a set and forget system which will take any cartridge with an unfired length from 50-67.5mm (most manufacturers will quote the fired cartridge length in their technical date). That means any cartridge, bird, buck or slug that you would use in training or competition will fit in the Nexus PRO system with no further adjustment. The Nexus system can be set up either left or right-handed and changed at any time using just one Allen key.

The Nexus PRO is built with IPSC in mind and therefore conforms perfectly to IPSC rules, but the Nexus PRO is even more suitable to 3 Gun and other disciplines than ever before.

Versatility

• Can be set up right or left-handed

• Load twins or quads whenever you want

• Self adjusts to fit any cartridge used in dynamic shooting

• Can be fitted to CLIC, Tek Loks, ELS clips or our  Velcro Competition belt

• Fully Modular

• Adjustable spring tension and hand clearance

• 4, 8, 12, 14, 16, 20, 24, 28, and 32 round configurations available

Construction

• Aerospace-grade aluminium backplate, hard anodised

• The Nexus PRO is just 50mm from front to back, including cartridges (49mm without). There is no danger of exceeding the IPSC 75mm rules even with a loose belt or a thick attachment mechanism (Tek Lok or Velcro).

• The plastic parts are made using the latest in 3D manufacturing technology. From -50 degrees C, to 150 degrees C; the Nexus PPRO will always work as you expect it to!

• Minimal maintenance is required. Self-cleaning even through the thickest of mud and sand.

• We are using the latest in materials technology to utilise spring systems that will be long lasting and corrosion-free.

Easy to use

• The Nexus PRO can be supplied in a ready-to-assemble state with clear and comprehensive instructions or assembled for you in a right or left-handed configuration.

• Set and forget. Once the loader is assembled it never needs to be adjusted as it will self adjust to any usable cartridge length.

• Low release force and natural release directions.

• When emptied of ammo the loader collapses down to the smallest possible footprint. An empty loader will not get in the way during bending, crouching or any other form of PSG acrobatics.

Weights: PRO4 92g, PRO8 178g, PRO12 265g, PRO14 305g, PRO16g 354, PRO20 428g, PRO24 527g, PRO28 617g, PRO32 695g

As standard, the Nexus PRO comes with our lifetime warranty.

Secure the action with the unique 9mm PCC MAGLOAD breech flag! Designed to stand off from the bolt face to protect your extractor and clear the barrel locking lugs so you can drop the bolt on the flag without breaking it.

Stow the flag easily with the integrated picatinny rail mount on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

SIZING: Measure around where you will wear the belt (around the belly button) + clothes and order the largest belt that will fit you.

The sizes accommodated are:

• Small 26-44″ (18″ of belt space)
• Medium 34-54″ (26″ of belt space)
• Large 42-60″ (32″ of belt space)

Everyone knows how to use a seat belt, and everyone knows how secure a seat belt is. Quick to fasten and quick to adjust. Avoid the faux pas of a belt coming off in competition by using the MAGLOAD Velcro Competition Belt.

Using our proprietary rubber and cork core construction, we’ve thinned this belt down to a mere 6mm, further reducing weight and increasing your range of movement without sacrificing rigidity for your loaders. 100mm wide genuine Velcro ensures that your loaders and accessories stay where you put them.

Supplied with a Magload PVC Patch and elastic strap to secure excess webbing.