Hernon Manufacturing Inc.

Accurizer 76111 is a single component U.V. anaerobic sealant. 76111 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. This Sealant is specially formulated for Ammunition that needs greater fit tolerance and higher bullet pull forces. Curing occurs when the adhesive is applied between mating surfaces. The cured adhesive is a thermoset plastic and endures exposure to most solvents. Ammunition Sealant 76111 cures quickly at room temperature without the need for surface activators or heat to seal primer and case mouth assemblies. Fixturing strength develops in two to three minutes, Full strength will be reached in 24 hours. Cure fillets at UV light irradiances above 100 milliwatts/cm² to insure proper cure.

Blank Ammunition Sealant 48641 Is a medium viscosity, UV and LED curable compound formulated to provide high performance, fast curing, coating and sealing of ammunition blank tips. This product is also used for shallow potting applications.

Blank Ammunition Sealant 48642 Is a medium viscosity, UV and LED curable compound formulated to provide high performanc

Cyanoacrylate Remover 14 is a specially formulated solvent to dissolve cured cyanoacrylate- based adhesives in between parts, clothing, or various surfaces. Remover 14 will allow the removal of cyanoacrylate adhesives in several minutes to several hours depending upon the amount of adhesive to be removed. Tissue or cloth saturated with Remover 14 will wipe off thin layers of adhesive. Larger beads or drops will require reapplication of the solvent. Bonded parts may require soaking.