Niebling Technische Bürsten GmbH

Barrel-checking-mirror

The Niebling barrel-checking-mirror offers you an optimal view. Applicable for the illumination of poorly visible gun components in rifles, pistols or shotguns, for example at firearm barrels or magazine- and Cartridge feed shafts. Due to the reflecting light even the smallest damages and dirt can be found and targeted removed.

The Niebling barrel-checking-mirror  is available as a single product and also in the Niebling GunCare kits. Due to the high material quality and high-quality treatment, it is guaranteed that the inspection mirror is your constant partner for all pending gun cleaning.
 

Bore Blitz – The brushless barrel cleaner
For maximum cleaning effect and care – gentle on the bore as never before!

BoreBlitz is known for it’s innovative, international patented, brushless design and the non-abrasive cleaning effect. All of this makes it a perfect tool for higher cleaning intervals and field cleaning.

Two calibrated, pressurized rubber balls are integrated into the cleaning fabric to press it evenly to the bore. That way the liquids are distributed perfectly even and the cleaning fabric can handle fields and groves. The additional effect of this non-abrasive cleaning technique is that excess fluids are wicked away – preventing the so called ‘fouling shot’.

Two sponges, integrated in the front and the rear part of the cleaning fabric work as a reservoir for your cleaning fluid, CLP or gun oil. That way you can go for double cleaning effect or use an intense cleaner in the first and a neutralizing  oil for preservation on the second sponge, all in one go.

Using our Pulpo on both sponges will provide you with a maxed out effect on cleaning and preservation.

Insert the pull cord with the brass weight from the chamber into the bore. Wind the pull cord around the handle to enhance power and comfort while cleaning your firearms with BoreBlitz. The optimized length of the pull cord and the cleaning fabric ensures best results even for long-barreled guns. Storing BoreBlitz in the zip bag after use is protecting the cleaning fabric from taking damage and keeps your other equipment clean.

All materials used in the production of BoreBlitz are designed and developed to be resistant against all commonly used gun cleaning fluids and oils, as well as heat resistant – innovation instead of limitation for durability and efficiency. After cleaning your guns BoreBlitz can be washed in warm, soapy water and re-used many times. The color coding of the cleaning fabric and the engraved caliber size on the brass weight make sure you’re always using the BoreBlitz that is optimized for your firearm.
 

Cleaning brushes and tools

One of the outstanding feature of the Niebling Gun Care product range it that any rods, brushes, tips and tools are fully compatible thanks to only one thread size. Your Niebling Cleaning rod can be used from caliber .22 (12.7 mm) for all pistol and rifles bore diameters and all supported shotgun sizes up to 40 mm launchers.

This is not only saving cash and space, but also ensures you can expand your Niebling cleaning equipment at any time without worries.

In addition to one-piece cleaning rods (300 – 1.250mm length) from cal. .22 / 5,56mm we supply multipart rod sets and single extension parts from cal. .17 / 4,5mm , which can be individually combined for required length using compatible thread sizes.

All our products are calibrated to a specific bore diameter to lower the risk of the bore taking damage and to have maximal cleaning effect at the same time.

We also offer a fully compatible range of cleaning products for caliber .17 (4.5 mm) with a smaller thread size.

New!

Niebling Lenspen offers you an easy and effective lens-cleaning of  your rifle scope, rangefinder, field glass or camera. First remove the dust and contaminants with the integrated brush, then clean the lens with the cleaning-pad. Removes fingerprints, dirt- and grease spots from your valuable lenses without any cleaning fluid.
 

Gentle bore cleaning with cleaning felts and pads

High-quality cleaning felts from Niebling are produced as a pure natural product without using any chemical additive substances. Due to its elastic, but dimensionally stable characteristics, those cleaners ensure a reliable and gentle cleaning, oiling and preservation of the gun barrel.

The special fiber structure of the felt absorbs coarse to very fine dirt particles and transports them reliably to the outside.

Depending on the degree of contamination we offer two types for normal and intensive cleaning. Matching felt holders from .22 / 5,56mm are available with M4 and M5 outside thread with insertion aid.

Besides cleaning felts we supply cleaning pads and brass pad tips from cal. .22 / 5.56mm.
 

Custom Kits

Your gun, your preferences. With our latest product, the Niebling Custom Kits, it’s possible to pick exactly what you need, want or prefer to clean your firearms. Our one-thread-policy makes sure you can use all components of the Niebling product range to create your individual cleaning kit from caliber .22 up to 40 mm.

The base kits contain a 5 mm cleaning rod and three extensions with a usable length of 31,8“ (810 mm). It’s held in two sizes of bags you can choose from, together with our cleaning fluid ‚Pulpo‘, a bore mirror and a universal utility brush.

All you need to do is to add your preferred cleaning method components for the calibre sizes you would like to keep perfectly clean and safe.

Create YOUR Niebling cleaning kit in no time!

Also available as PINK HUNTER Edition