Andres Industries AG

The PumIR-6Z+ is a compact in line thermal clip-on with a range that is 2km in the basic configuration. It can be extended upto 4km by using an afocal lens. The lens is automatically detected and collimation settings are loaded from storage. Thebiggest innovation, however, is the 0.5x eyepiece lens, which allows it to be used with higher magnification night sights.

TigIR-M

The TigIR-6M™ manufactured in Germany is currently the shortest Clip-on thermal with 55mm optics. The device is ideally suited for use in combination with 3-6x magnifying scopes. The extremely short design of only 111mm permits a mounting on machine guns, where due to the design there is only little space available for an attachment. In combination with certain scopes, such as the ELCAN Specter, the device protrudes only 10cm beyond the optics.The robust aluminum housing offers good protection against drops and ensures consistently high precision even at different environmental temperatures. Furthermore, the subpixel collimation (SPC) ensures even more precise shooting results.

Data sheet
Length: 111 mm
Weight: 491 g
Temperature resolution: 40 mK
Sensor resolution: 640x512
Zoom: 0,8x, 1x, 2x, 4x, 6x
Focal length: 55 mm
Spectrum/pixel pitch: 7.5-13.5 μm / 12 μm uncooled microbolometer
Angle resolution: 0.0125°/0.75'/45" (equivalent to 2.18 cm/px at 100 m)
FOV: horizontal 8° / vertical 6.4° (14.0 m / 11.2 m)

Other features:
- waterproof housing and battery compartment
- waterproof device socket for external power supply and video output and buttons
- 15 thermal filters
- integrated lens flap

• Power on/off
•  Manual calibration
• Lens protection

Mounting options:
- Compatible with ERATAC system (Picatinny rails).
 

TigIR-Z

The TigIR-6Z+™ is currently the lightest and shortest Clip-on Thermal with 55mm optics. No other device with such a short overall length of only 111mm achieves a range of 3000m (standing person). These small dimensions could only be achieved by developing a specially folded ocular optic. This makes it possible to use the device in front of different scopes (3-6x) etc. without loss of quality. Since the entire housing is made of highly robust aluminium and the objective lens is athermal, the TigIR-6Z+™ has outstanding precision even under extreme temperature conditions. The housing surface is hard anodized and coated with Cerakote. The TigIR-6Z+™ can resist even hard impacts in a rough environment, but is not heavier than 500g/17,6 oz and therefore lighter than any other comparable device.

The TigIR-6Z+™ detects the smallest temperature variations owing to a temperature resolution of 40 mK. AI pixel upscaling can achieve a sharper image compared to conventional thermal imagers.

Data sheet
Length: 111 mm
Weight: 491 g
Temperature resolution: 40 mK
Sensor resolution: 640x512
Zoom: 0,8x, 1x, 2x, 4x, 6x
Focal length: 55 mm
Spectrum/pixel pitch: 7.5-13.5 μm / 12 μm uncooled microbolometer
Angle resolution: 0.0125°/0.75'/45" (equivalent to 2.18 cm/px at 100 m)
FOV: horizontal 8° / vertical 6.4° (14..0 m / 11.2 m)

Other features:
- waterproof housing and battery compartment
- waterproof device socket for external power supply and video output and buttons
- 15 thermal filters
- integrated lens flap

• Power on/off
•  Manual calibration
• Lens protection

Mounting options:
- magnifier eyepiece
- mounting on scopes or target optics with the use of a Rusan adapter