RADAR LEATHER DIVISION SRL

2-Fast Extreme Holster

2-Fast EXTREME is a professional duty holster for extreme use in Polyform with 4 retention levels. The first is the automatic safety system Evolock-S Evolution Locking System, an internal locking mechanism activated by the weight of the weapon, quick-release and simple. The second is the Rotoloop-S system, an external weapon protection strap with automatic opening by means of a press-activated rotating mechanism. Thanks to the 2-Fast solution, the two systems are integrated and can be activated simultaneously during the draw with a single, natural movement of the thumb. The third is the Loop Guard Safety Device, a protective shield against bumps or extraction attempts that can be paired to the Rotoloop-S, LL Look Loop and Rotolock systems. The fourth is the BS-PRO - Back Shield Protection device, a rigid tab located behind the release lever in order to prevent releasing from behind. The fifth is the STR SYSTEM device, made up of a retaining screw that stops internal movement of the weapon, acting directly on the slide. The body can be paired with the Multilink 2 wearability system, a three-screw fastening centre distance spaced at 120° to attach the same holster onto any support.

Duty gear - belts and accessories

Radar produces a wide range of belts and ccessories to satisfy the most diverse requests.

The accessories include a variety of magazine pouches, handcuff pouches, spray holsters, radio pouches, glove holsters, baton holders, light pouches, belt keepers and lanyards. For each kind of accessory Radar can supply a variety of options depending on the raw material (leather, microfiber, nylon, cordura, rubber,…), the object to contain, the final finish,

Pancake Tech Holster plus

The PANCAKE-TECH, is one of the new Generation “strong & lightweight” style holsters; made in Leather Look Microfiber , internally reinforced with a layer of polymer, with Microfiber Suede lining. This construction makes the holster highly durable, assuring at the same time top protection of the Handgun. All the edges are reinforced with special long life material. Thanks to the 3 slots the holster can to be worn in high ride in either standard or cross-draw position.

RDC System

The back of the “low ride 3x120” belt loop has a mechanism that allows to adapt the belt loop for use with belts from 58 mm to 45 mm. For regulation of the light of the slots, loosen the hexagonal screw, slide the mechanism into the desired position, and tighten the screw.

To connect or remove the holster complete of the male part of the RDC rotating slide from the female part of the RDC rotating slide press the 2 side buttons (A) with the thumb and the forefinger and remove the holster. To rotate the holster in the desired position, remove the holster from the support, select the desired position/inclination for the holster and connect into the female part of the RDC system on the support.

The range of Radar holsters complete of the male part of the RDC slide can be applied to any of the mentioned supports if used in combination with the female part of the RDC slide, to adapt to various operational duties.

The female RDC slide complete of “U” shake support (item 6503-1156) can be mounted on any kind of Molle support, in various positions, in order to easily activate the release levers (A).

The “high ride 3x120” belt loop has two pivots that allow to adapt the belt loop for use with belts from 58 mm to 50 mm and 45mm. For regulation of the light of the slots, remove the screws on the back of the pivots, move to desired position and fix the screw.

Art.6503-5026 Swivelling leg harness with double leg connection complete of RDC rotating slide (demale part)

In order to position the RDC Molle on the desired support, unscrew the 4 hexagonal screws using the supplied wrench, pass through the Molle straps and position, screw back the 4 screws.

Safe+Index & Thumb Holster

6657 Safe+Index & Thumb is a professional duty holster in Polyform with 3 retention levels. The first is the patented L.E.P-Locking on the Eject Port Automatic Safety System located on the side and ergonomically configured to facilitate a quick and natural draw as well as reholstering and locking, ensuring high safety performance and efficiency. The second is the R.L.L. - Rotating Locking Lid system located on the top and made up of a protective hood that facilitates and streamlines drawing, holstering and locking the weapon. The third is the STR SYSTEM Safety Device, made up of a retaining screw that stops internal movement of the weapon, acting directly on the slide. The body can be paired to the Multilink 2, RDC and RDC evo wearability systems to use the same holster on any support and to move it quickly thanks to a three-screw fastening centre distance spanned at 120° and a multi-position rotating disc.