Current exhibitor list IWA OutdoorClassics 2022
More than 800 exhibitors from over 50 countries have already registered for IWA OutdoorClassics 2022. All registered exhibitors can be found in the current exhibitor list:
Exhibitor list (as of: 16.07.2021)
The exhibitor & product database of IWA OutdoorClassics 2021 shows all exhibitors who were registered for this exhibition. [status: 20.05.2021]
Organize Sanayi Bolgesi Yerkoy
For over 25 years Garanti has been a leading manufacturer of functional outerwear and within the last 10 years Garanti has started to manufacture ballistic protective equipments as well and has become an outstanding supplier of body armor and vehicle armor products. As of today, we operate in our modern production facilities over 30.000 sqm covered area with 350 highly experienced personnel. We have been serving number of key accounts like Presidency of Defense Industry, Turkish Armed Forces and General Directorate of Security as well as several other domestic and international customers.
So far we have manufactured and delivered thousands of light weight ballistic protective helmets for several Military and Law Enforcement programs.
In addition to these ballistic protective helmets we have designed and produced several complementary items such as IR strobe, T-Light, add-on ballistic appliques for rifle protection, soft and hard ballistic mandibles, side armor, 9 mm & fragment visors, NVG mount and counterweights. All of these are manufactured in thousands and delivered to end users and are used in battlefield for many years.
Thanks to our accredited ballistic testing laboratory and our on going R&D work, we have designed, tested and developed our new ultralight ballistic protective helmets that are only 1 kg !
Our new product that is launched just recently offers full face protection with a hard mandible and a fragment visor along with the ultra-light ballistic helmet.
Other than body armour items, we have produced and delivered hundreds of shields and wheeled shield sets in level BR7 and NIJ0108.01 level IV.
In textile production, we do manufacture breathable/waterproof garments, flame retardant garments, sleeping bags, tents, load bearing vests, back packs, airbag equipped vests and jackets according to the customer requirements and supporting our production with our in-house textile laboratory.
We intend to expand our business globally and develop new products to meet the expectations of our valuable customers and increase our production capacity and make new investments in technology and human resources to keep up a sustainable growth and respect to nature.
NON-BALLISTIC BUMP HELMET
• Our ultra-light weight bump helmet shell is made of an extremely strong resin impregnated glass fiber.
• Superior protection against impacts
• High-cut geometry has a comfortable fit and allows you to use with earphones and similar communication devices.
• Helmet shell can be manufactured with or without air and water drain holes
• Side rails and shroud offer a platform for NVG, T-light, cameras and similar accessories.
• Modular and specially designed shock absorption inner-liner system offers maximum protection and comfort.
Meets the shock absorption requirements of EN 1385
• Comfort pads that are located on top of the expanded polypropylene (EPP) liners are fixed with velcro patches and can easily be replaced.
• 4 point harness with dial adjuster sytem and nape pad retention system provides a comfortable fit.
• There are velcro patches located outside the shell for over the helmet accessories.
• Protects the operation personnel of search and rescue teams, military vehicle personnel, and people doing outdoor sports against impacts.
• As the accessory carriage rails and shroud are the same of those used on the ballistic protective helmets our non-ballistic helmets can be
used for training purposes for ballistic protective helmet users.
Ballistic Protective Hard Mandible (for mid-cut model helmets) Full Face Protection
This mandible is designed and manufactured to provide lower face protection from ballistic and fragment impacts up to a certain level.
Easy to install and remove on side rails of the ballistic protective helmet.
Ventilation holes prevent fogging during use with visor.
Available sizes: M/L and XL/XXL
NIJ Level IIIA 9 mm 20/5000 ballistic protection: 425m/s
V50 value for 17 gr FSP Stanag 2920: min. 650 m/s
Available colors: Black, military green, tan
Compatible with: Mid-cut helmet and fragment visor
Weight (+/- 50 gr): 500gr
ULTRA LIGHT BALLISTIC PROTECTIVE HELMETS - ACH HIGH-CUT MODEL
Our new product is made of UHMWPE High-Cut helmet is only 1 kg ,including shell with edge band, suspension and retention systems, shrouds and side rails. With this ergonomic comfort, our helmet is not only the lightest helmet in the market, but providing also highest performance at V50 values as min.760 m/s.
It is manufactured according to NIJ and Stanag standards and tested in-house ballistic testing laboratory.
- Available Sizes: M – L – XL – XXL
- Material: UHMWPE
- NIJ Level IIIA 9 mm ballistic protection: Yes
- NIJ Level IIIA .44 Magnum ballistic protection: Yes
- V50 value for 17 gr FSP, STANAG 2920: Min. 760 m/s
- Blunt Impact Resistance DOT FMVSS 218: Average Acceleration @ 10 ft/s < 100G
- Retention System: 4 point, worm dial & nape pad
- Available Colors: Black, Foliage Green, Tan
- Outer Surface Area (+/- 5 cm²): 1020 - 1065 - 1155 - 1205 cm²
- Helmet Weight (+/- 50 gr): 1000-1050-1150-1200 gr*
* Helmet weight includes: painted shell with edge band, suspension & retention systems, shroud and side rails.
Ballistic Protective Shields
We develop and manufacture ballistic protective shields and bomb blankets in all protection levels defined by NIJ and STANAG standards in different measuremens inquired by the end users. We furnish them with several accessories that are needed on the battlefield.
In the first picture our product for Law Enforcement Teams, is equipped with visor, led light and has rifle stand and has Level III ++ protection according to the NIJ standards.
Second one, is equipped with wheels can be easily maneuevered into any position by providing head-to toe level IV ballistic protection. It consists of 3 detachable panels which can be folded in 90 degree position. Commonly used in security check points, government buildings.
Quick release laser cut plate carrier
The plate carrier that has been designed as simple as possible. Its very refined design allows it to be easily donned or removed , to have great freedom of movement, to be easy to adjust, ... This model of plate carrier gives you the possibility of wearing hard ballistic plates on front and back of the torso.
Laser-cut MOLLE system over its entire surface allows an interesting payload capacity. Its seamless design reduces the risk of weak points.
Garanti kompozit offers you products from these product groups:
- Clothing (412)
- Outdoor articles (293)
- Hunting accessories (220)
- Clothing (195)
- Equipment, operational equipment (327)
- Training (134)
Clicking on an exhibitor opens his profile with more information.