Current exhibitor list IWA OutdoorClassics 2022
More than 800 exhibitors from over 50 countries have already registered for IWA OutdoorClassics 2022. All registered exhibitors can be found in the current exhibitor list:
Exhibitor list (as of: 26.07.2021)
The exhibitor & product database of IWA OutdoorClassics 2021 shows all exhibitors who were registered for this exhibition. [status: 20.05.2021]
MDT - Modular Driven Technologies
MDT - Modular Driven Technologies
7949 Venture Place - Unit 1
Chilliwack, British Columbia, V2R 4H5
Accuracy improvement is the whole point of MDT products.
Our chassis systems have been tested and verified to improve accuracy up to 26% - right out of the box.
MDT chassis systems are designed for modularity - customization using a wide variety of chassis configurations, components and accessories.
We test every component and every chassis system we develop to make sure it does the job as promised.
We are confident that there is an MDT chassis system to match your shooting style and application and get you a step further on your journey to Shoot Better.
HS3 Chassis system for Bolt Action Rifles
Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)
The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).
This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.
The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).
The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.
- Weight: 2.0 lb
- Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
- Accepts any AR-15 grip, without a beavertail.
- Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
- Polymer sides in Black or Flat Dark Earth (FDE)
- Remington 700 Short Action
- Remington 700 Long Action
- Tikka T3 Short Calibers
- Tikka T3 Long Calibers (Requires MDT 3.540 Magazine)
- Savage Models 10, 11, 12, 16 - Short Calibers
- Savage Models 110, 111, 112, 116 - Long Calibers
- Savage Axis - Short Calibers
- Mossberg MVP - .223
- Mossberg MVP - .308
- Howa 1500 / Weatherby Vanguard - Short Calibers
- Howa 1500 / Weatherby Vanguard - Long Calibers
- Remington Model 7
- Remington Model 783 - Short Calibers
MDT ACC Chassis system
The ACC (Adjustable Core Competition) Chassis is designed around an integrated, modular weight system which allows you to customize the balance and mass of your rifle to maximize performance and minimize recoil.
The ACC comes with a Skeleton Rifle Stock with a steel butt pad plate, for added weight, and a dedicated space to add even more weight to the stock if required.
The ACC Chassis features a full Arca rail the entire length of the forend and M-LOK mounting points for accessories and additional forend weights - both internal and external - allowing you to add up to an additional 9 pounds of steel to your rifle.
If you're a match shooter or hunter looking for a game changing piece of gear, look no further than the MDT CKYE-POD. Quality craftsmanship and fast, simple adjustments make this bipod the ultimate in versatility.
The CKYE-POD was developed for the competitive shooter with a focus on strength, ease of operation and versatile configurations.
The legs rapidly extend without having to release any locking mechanism - getting your rifle to height quickly and easily. Switch from a low prone shooting position all the way up to seated shooting in seconds.
The legs can be rotated in 3 locking positions from front to back: stowed, 45 degrees, and 90 degrees. The CKYE-POD legs also swing out side-to-side up to 90 degrees. The CKYE-POD mount also has170 degrees of cant and 360 degrees of pan. Turn the CKYE-POD 180 degrees and it becomes a barricade stop..
The CKYE-POD leg adjustments can be set independently - and with the available cant and pan features - the CKYE-POD provides the ultimate foundation for any shooting situation.
MDT Metal AICS Magazines
MDT AICS-pattern metal magazines are manufactured from high strength steel, nitride-finished and coated with Cerakote Elite for ultimate durability and performance.
The short action magazines are offered for .308 Win and 6.5 Creedmoor family cartridges, and are available in 5-round, 10-round and 12 round capacity.
These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
The 10-round magazines are available with or without the front binder plate. See details below for benefits and limitations of each version.
TAC21 Chassis system for Bolt Action rifles
Our TAC21™ chassis system a combination of benchrest accuracy, superior ergonomics and specialized design. This chassis brings the bolt action rifles to the next level in versatility and modularity, with an instant improvement in accuracy.
The chassis system is manufactured out of billet 6061-T6 aluminum, which has been hard anodized to mil spec type III for extra strenth, and has been finished with Cerakote™ in Black or Flat Dark Earth (FDE).
TAC21™ chassis is engineered to minimize warping and distortion. The rifle receiver only makes contact with the TAC21™ chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel (diameter up to the receiver size – 1.350”), free floating.
Inherently the TAC21™ has a straightline design, meaning that the recoil comes straight back instead of making the front of the rifle kick upwards. This results in more accurate and quicker follow up shots. This also translates to a decrease in felt recoil and comfort.
The TAC21™ chassis system is currently manufactured for the following bolt action rifle platforms:
- Remington 700 Short Action (.223 and .308 bolt faces)
- Remington 700 Long Action (.300WM, .338LM)
- Savage Short Action, Models 10, 11, 12 and 16 (.223 and .308 bolt faces)
- Savage Long Action, Models 110, 111, 112 and 116 (.300WM and .338LM)
- Tikka T3 - Short Calibers (.223 and .308 bolt faces)
- Tikka T3 - Long Calibers (.300WM, 6.5x55). Requires MDT 3.54 Magazine.
Mounting and Compatible Accessories
The TAC21™ chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased seperately), offering the option to customize from the wide variety of Accessories available on the market.
The TAC21™ chassis uses external box style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails on the fore-end and side of the action housing. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).
With a top full length MIL-STN-1913 accessories mounting rail. The built-in mounting rail has 20 MOA (Minutes of Angle) on the action housing and is parallel to the barrel axis on the fore-end.
Note: Long action magazines come in 3 different lengths: 3.715", 3.775" an 8.050". Our chassis use 3.715 magazines. If you purchased the Remington 700 Tactical Chassis Rifle, the magazine well is 3.775.
- Increases accuracy by up to 28%
- Construction aluminum hard anodized to mil spec type III
- Cerakote Finish in Black or Flat Dark Earth
- 20 MOA built in top rail
- Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
- Lightweight, free-floating modular fore-end
- Will accommodate barrels as thick as the action
- Compatible with AICS style magazines in .223 or .308 (SA) and 300WM, 30.06, 338LM (LA). (Long Action Magazine length 3.715)
- Weight: 3lb - 3.6lb
For a lighter, more compact chassis, please also see our LSS chassis System or our HS3 Chassis System.
MDT - Modular Driven Technologies offers you products from these product groups:
Clicking on an exhibitor opens his profile with more information.