+++ The entries in the exhibitor & product database correspond to the registration status for IWA 2020 from 1 February 2020. +++
Chemical composition inspection of incoming raw material, lead smelting, lead wire extrusion, cold swaging, copper electroplating, final swaging and polishing are the different stages of CamPro production process. The parameters of each stage are tightly controlled to obtain a uniform product within each production lot and from lot to lot.
Thanks to our bullets thick copper plating, barrel rifling cannot cut or tear the bullets to the lead core, which:
- Prevents lead emissions.
- Prevents small copper particles from shedding off the bullet during its path to the target and reducing the precision of the shot.
- Protects the barrel from being ridden with lead.
- Allows the use of the maximum amount of powder recommended for your type of firearm (magnum).
The ductility of our copper bullets makes them easily deformable upon contact with a barrel wall or rifling, decreases equipment damage and minimizes barrel wear.
The quality of the bond between the copper and the lead prevents any separation of the metals upon impact with the target. As a result, the risks of ricochets and rebounds of large fragments towards the shooter are reduced to a nil.
The shape, concentricity, uniformity, and dimensional consistency provide the CamPro bullets with high-precision shots and a better grouping on targets.
The many calibers offered are: 32 71gr FCP RN, 32 85gr FCP RNFP, 32 115gr FCP RNFP, 380 95 gr FCP RN, 380 95 gr FCP HP, 9mm 115 gr FCP RN, 9mm 121 gr FCP RN, 9mm 124 gr FCP RN, 9mm 124 gr FCP HP, 9mm 147 gr FCP RNFP, 38/.357 125 gr FCP, 38/357 148 gr FCP HBWC TC, 38/357 158 gr FCP TC, 10mm/40 155 gr FCP TC, 10mm/40 165 gr FCP TC, 10mm/40 165 gr FCP SH , 10mm/40 180 gr FCP TC, 10mm/40 180 gr FCP RN, 10mm/40 180 gr FCP SH, 10mm/40 180 gr FCP HP, 10mm/40 200 gr FCP TC, 45 200 gr FCP TC, 45 230 gr FCP RN, 45 230 gr FCP HP, 45 COLT 250 gr FCP RNFP, 44 240 gr FCP TC.
BT: Boat Tail
FCP: Full Copper Plated
FMJ: Full Metal Jacket
RN: Round Nose
RNFP: Round Nose Flat Point
RNHP: Round Nose Hallow Point
HBWC: Hallow Base Wad Cutter
HP: Hallow Point
TC: Truncated Cone
TCHP: Truncated Cone Hallow Point