High performance in target sports, nature activities and protecting people

3 - 6 March 2017 // Nuremberg, Germany

Posting print layout

What information should be shown in the print layout?

Create print layout
Zoom product LOGO_Stahllamellengeschossfang




Request information Request information

Contact us

Please enter your personal information and desired appointment. You can also leave us a message.

Your personal information

Your message for us

Desired appointment during the exhibition

* Compulsory fields you must fill in.
Your message has been sent.

Would you like to use more facilities and advantages of the platform? Then please log in – or register here.

An error has occurred.

The steel blade bullet trap V4 needs a depth of 350 mm plus splinter protection. Hereby it belongs to the flattest bullet traps. In the width and height the dimensions can be adapted individually to the local circumstances, whereas a grid measure of 1000 mm in the width is to be considered as optimum. The remaining rest width is closed by a matching protection.

The steel blade bullet trap can be produced according to requirement in different steel qualities and material strengths. Particularly highly wear-resistant special steels, so-called "wear plates" are used, as for example Hardox 400 or Hardox 500. According to requirement the material strengths of the frame and the blades are realised with measures between 10 mm and 15 mm. Stronger thicknesses are possible on request.

In front of a vertical steel plate wall (back wall) blades are arranged Venetian blind-like, horizontally under an inclination of 30 ° to 45 °, so that the striking bullets are deflected to the back below. Between the blades and the back wall remains a gap into which the deflected bullets can fall down. The number of horizontal blades respectively the vertical distance of each other and the respective inclination corner is chosen adapted to the range so that a direct bombardment of the back wall is not possible. To the sides the construction is closed by vertically standing steel plates (stand) which contain special cuttings to allow the inclusion of the blade support. As a specific feature the blade storage protected under patent law is to be emphasised which allows a form-logical connection of the support in the stand. The unavoidable dilution of the steel quality by welding in the support structure is prevented hereby.

To exclude as much as possible the danger by ricochets, the supports were optimised geometrically especially for this purpose, so that striking bullets are certainly derived in the direction of the rear bullet trap wall. Moreover, the front edge of each blade pointing to the shooter and those of the stands at the top or front in shot direction are bevelled in rear direction under a degree of 45 °. This bevelling is produced by a special cold treatment (not thermally like burning). This causes only a minor loss of the material quality to be neglected. Another advantage of the blade storage protected under patent law is the possibility to exchange worn blades and editions with easy means without specialist knowledge. The complete bullet trap is delivered with a work-sided Primer as standard. On request a coloured painting to prevent corrosion is possible, however, not necessarily required.

There are two kinds of bullet collection devices to choose from. On the one hand, there is the possibility to catch the bullet leftovers in push boxes which can be pulled out to the front with the cleaning routine and emptied afterwards. To prevent ricochet shots the push boxes are battened down front-sided with softwood treated according to German Institute for Standardization DIN 4102 – B1 and with elastic fibre plates. On the other hand there is the possibility to collect the bullet leftovers in a helical chamber which can be exhausted by a front flap with the regularly scheduled cleaning or can be sucked out. This front is protected effectively against bouncing during the shooting by the coverage with an elastic fibre block.

Furthermore, there is the possibility of automated bullet extractor , in which the projectile residues are conveyed by a belt transporter system to a central collecting box , which can be changed easily . So it is possible to minimize the maintenance downtimes. In addition, this type of projectile discharge has occupational health benefits because of the direct contact of the maintenance personnel with the projectile remains unnecessary.

Ausbau von Raumschießanlagen

LOGO_Ausbau von Raumschießanlagen

Durchschusshemmende Fenster

LOGO_Durchschusshemmende Fenster



Thermoplastische Geschossfänge

LOGO_Thermoplastische Geschossfänge

There are no entries in your notes.

Show notes


The selected entry has been placed in your notes!

If you register you can save your notes permanently and access all entries even when underway – via laptop or tablet.

You can register an account here to save your settings in the Exhibitors and Products Database and as well as in the Supporting Programme.The registration is not for the TicketShop and ExhibitorShop.

Register now

Your advantages at a glance:

  • Advantage Save your notes permanently. Use the instant access to exhibitors or products saved – mobile too, anytime and anywhere – incl. memo function.
  • Advantage The optional newsletter gives you regular up-to-date information about new exhibitors and products – matched to your interests.
  • Advantage Call up your notes mobile too! Simply log in and access them at anytime.