15" Carbon Fiber Free Float Tube
Weight: 0.53 Pounds
Inside Diameter 1.7"
8 MLOK Slots on 7 sides, 5 MLOK Slots on the top,
Aluminum Barrel Nut
Barrel Nut Wrench for use with 1/2" Socket Drive Torque Wrench (Torque Wrench Not Included)
To Install This rail you will need the following tools that are NOT included:
Action Blocks for AR15 Upper
Torx T15 Wrench
9/64” Allen Wrench
1/2” Socket Driver torque wrench for use with supplied barrel nut wrench
Medium Strength Thread Locker; aka Blue Locktite
These assembly instructions presume you are starting from unassembled parts OR you have already disassembled your upper.
Place your upper in the action block in your vise and install the barrel.
Tighten the supplied barrel nut as far as you can by hand. The use of copper anti-seize or grease on the barrel nut is recommended.
Use the supplied barrel nut wrench on a ½” drive torque wrench to tighten the barrel nut to 35-50 ft/lbs to achieve alignment with one of the gas tube notches.
NOTE! Going too far over this max torque can damage the barrel nut.
Ensure the gas tube notches are aligned properly by inserting the gas tube and making it point towards the gas port. If it is canted adjust torque up or down accordingly within torque range.
Install Gas tube and gas block as needed by your particular barrel assembly.
Slide handguard over barrel onto barrel nut.
Install the 4 T15 Torx 8-32 screws into the handguard once it is over the barrel nut. Use of medium strength thread locker is recommended. Do not torque harder than you can move the T15 wrench with one thumb.
Install the 9/64” allen head 8-32 screws and nuts into the clamping mount of the handguard. Use of medium strength thread locker on these is recommended.
Observe alignment of the handguard as you tighten the clamping screws. You can change alignment of the handguard depending on how you tighten it and the angle at which you hold it while tightening it.
Your installation is now complete.
Should you damage your barrel nut, extras can be purchased $40.00 from KE Arms.Extra barrel nut wrenches can be purchased for $25.00.
Leider gibt es für diesen Aussteller kein deutsches Firmenprofil.
KE Arms is a manufacturer specializing in products for the firearms industry. These product areas include complete firearms and components for AR15 and AR10 rifles, shotguns, pistols, and roller lock firearms. Our emphasis in manufacturing is robust quality and a dedication to the advancement of firearms technology and usability. Our team combines 25+ years of tier-one manufacturing experience in the automotive, aerospace and semi-conductor industries, along with modern combat in both Iraq and Afghanistan and law enforcement applications. Our competition shooting team actively participates in our cycle of research and development. This unique combination allows us to produce firearms and accessories with the most advanced tools and techniques in the industry that are specifically designed for real-world applications. Our products are all made in America by Americans