The back of the “low ride 3x120” belt loop has a mechanism that allows to adapt the belt loop for use with belts from 58 mm to 45 mm. For regulation of the light of the slots, loosen the hexagonal screw, slide the mechanism into the desired position, and tighten the screw.
To connect or remove the holster complete of the male part of the RDC rotating slide from the female part of the RDC rotating slide press the 2 side buttons (A) with the thumb and the forefinger and remove the holster. To rotate the holster in the desired position, remove the holster from the support, select the desired position/inclination for the holster and connect into the female part of the RDC system on the support.
The range of Radar holsters complete of the male part of the RDC slide can be applied to any of the mentioned supports if used in combination with the female part of the RDC slide, to adapt to various operational duties.
The female RDC slide complete of “U” shake support (item 6503-1156) can be mounted on any kind of Molle support, in various positions, in order to easily activate the release levers (A).
The “high ride 3x120” belt loop has two pivots that allow to adapt the belt loop for use with belts from 58 mm to 50 mm and 45mm. For regulation of the light of the slots, remove the screws on the back of the pivots, move to desired position and fix the screw.
Art.6503-5026 Swivelling leg harness with double leg connection complete of RDC rotating slide (demale part)
In order to position the RDC Molle on the desired support, unscrew the 4 hexagonal screws using the supplied wrench, pass through the Molle straps and position, screw back the 4 screws.
Leider gibt es für diesen Aussteller kein deutsches Firmenprofil.
The characteristics of Radar 1957 holsters and products (safe, practical, sturdy construction and comfort) are truly superior because they are designed, manufactured and tested with the most extreme conditions in mind. We are aware that in such situations, the personal safety or life of the user may depend on equipment which is suitable and in perfect working order. For this reason we make our products in such a way to guarantee perfect effi ciency even under the most diffi cult operating conditions and stressful situations.
“Inspired by extreme” is an operative philosophy which involves an overall reconsideration of the role of the holster and its functions. This means a re-engineering project involving the entire production line, starting from Radar3 Cube - Radar Research Resources – including the collaboration of external safety operators throughout the world.
For this reason, Radar 1957 holsters are made using only fi nest quality raw materials, the most advanced construction solutions and the best technical precautions. Before being released for sale they undergo strict resistance tests.